Pioneer AVD-W6200 Owner's Manual page 33

6. Install the display on the arm.
Use the supplied hexagonal wrench to tighten up the screw after the adjustment. If you feel
there is still play between the display and the arm after tightening the screw, pull the lock
release lever and remove the display, then further tighten the screw with the hexagonal
wrench.
7. Put the cover on the arm.
Tighten the screw until
the arm does not move.
Loosen these
screws with the
hexagonal wrench
to rotate the arm.
To fasten the display,
tighten the hidden screw
with the hexagonal wrench
through this hole.
Put the cover on the
arm.
Display
32