Pioneer AVD-W6200 Owner's Manual page 32

16:9 rear seat entertainment display
Hide thumbs Also See for AVD-W6200:
Table of Contents

Advertisement

Available languages

Available languages

Installation
3. Install the mounting arm on the boots of the headrest shafts.
Slide the mounting arm from the right
to the left while holding it down.
If the mounting arm does not securely fit due to the shape or the material of the seat, use
the supplied rubber spacers to install the mounting arm.
4. Pass the headrest shaft through the holes of the shaft guides and return the
headrest to its original position.
To push the lock release
button, insert your finger
through the opening.
5. Open the arm and adjust the position and the angle. Determine the display
installation position.
31
Open the arm fully.
Never use the system if the
arm is not fully opened.
Slide the U-shaped brackets into the gaps
between the boots and the surface of the seat.
Boots
U-shaped bracket
Peel off the protective sheets from the spacers,
then affix the spacers onto the plastic of the
mounting arm.
Lower the headrest to its original position.
Remove the hexagonal wrench from
the mounting arm to use it later.
Rotate the arm head till the knob
points in a downward direction.
Turn the knob
Rotate the
counterclockwise.
arm head.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents