SMC Networks TigerStack User Manual page 14

SNMP Manageable
The optional Network Management Module (NMM) adds moni-
toring, control, and fault isolation functions to the LAN. For
economy, only a single NMM is needed to manage an entire
stack, whether it's one segment or as many as 32. For flexi-
bility, the NMM is field-installable and can be placed in any
hub, not just the top- or bottom-most units. With the NMM, the
stack can be managed in-band and out-of-band (both locally
and remotely) using SMC's EliteView
manager.
Easy to Install
TigerStack hubs can be easily installed in a 19-inch equipment
rack or on a desktop or shelf.
Available in a Wide Range of Models
TigerStack hubs are available with 10BASE-T ports for twisted-
pair cabling, AUI ports for backbone or mixed media connec-
tivity, BNC ports for thin coax cabling, and dual ST ports for
fiber cabling. Their ports are segmentable into as many as four
groups, depending upon the model.
The TigerStack family includes the following models:
• TigerStack 3312TA — a two-segment hub with twelve
10BASE-T ports and two expansion slots for optional AUI,
BNC, dual ST and 10BASE-T ports
• TigerStack 3326TA — a four-segment hub with 26
10BASE-T ports and two expansion slots for optional AUI,
BNC, dual ST and 10BASE-T ports
• TigerStack 3314T — a two-segment hub with 14 10BASE-T
ports
• TigerStack 3328T — a four-segment hub with 28 10BASE-T
ports
• TigerStack 3306BC — a two-segment hub with six BNC
ports, one AUI port, and one 10BASE-T port
A
BOUT THE
or any other SNMP-based
™
H
UBS
3