Freespace ® Za 190-Hz/250-Lz Zone Amplifier; Contents; Front-Panel Controls And Indicators; Rear-Panel Controls - Bose IZA 190-HZ Installation And Operating Manual

Setup and Operation
FreeSpace ZA 190-HZ/250-LZ zone amplifier
®

Contents

AC power cord
RCA cable
(1) Power cord
(1) RCA stereo cable
(4) Feet with pins
(8) Spade lugs (LZ only)
(1) 3-pin Euroblock (HZ only)

Front-panel controls and indicators

q
w
Note: Front-panel controls and indicators are identical on the FreeSpace
Off/On switch
.
Turns amplifier on or off�
POwEr indicator
3
Illuminates blue when amplifier is on�

Rear-panel controls

OUtPUt mOdE switch (Za 250-LZ only)
.
Allows stereo input sources to be output in mono or stereo�
Note: The ZA 190-HZ is designed to sum both inputs channels to mono�
Output trim control
3
Allows for attenuating individual loudspeaker outputs relative to the Master Level of the connected IZA 190-HZ/250-LZ
amplifier� The adjustment range is –20 dB to 0 dB� This feature is helpful when one output is powering loudspeakers
that need to be set at a lower volume level than loudspeakers on other outputs – including the outputs of an integrated
zone amplifier�
Page 28 Installation and Operation
Feet with pins (4)
Spade lugs (8) (LZ only) 3-pin Euroblock (HZ only)
q
w
ZA 190-HZ amplifier�
®
pro.Bose.com
English