Operation - Front-Panel Controls And Indicators - Bose IZA 190-HZ Installation And Operating Manual

pro.Bose.com
Operation – Front-panel controls and indicators
q
w
Note: Front-panel controls and indicators are identical on the FreeSpace
Off/On switch
.
Turns amplifier on or off�
POwEr indicator
3
Illuminates blue when amplifier is on�
inPUt CLiP indicator
$
Illuminates red whenever input source approaches the threshold value of -3dBFS� If the indicator illuminates frequently,
reduce input signal level�
miC/LinE inPUt gain control
/
Allows for fine-tuning of the MIC/LINE input level� If the INPUT CLIP indicator is red, reduce the input gain� The
adjustment range is 0 dB to +50 dB�
inPUt a/B selector switch
1
Allows you to choose between rear line inputs A and B from the front panel of the amplifier�
Rear line inputs A and B can also be selected remotely with the use of optional Bose Volume Control with A/B Select
User Interface accessory�
Note: When the Bose Volume Control with A/B Select User Interface is connected, the source select and the MASTER
LEVEL control will be overriden by the controls on the remote user interface�
TrebLe control
4
Allows adjustment of the output tone� Provides +/-6 dB of adjustment at 7 kHz�
Bass control
2
Allows adjustment of the output tone� Provides +/-6 dB of adjustment at 100 Hz�
MASTer LeveL control
(
Controls the overall system volume for both the loudspeakers and the variable AUX OUT�
The Master Level can also be controlled remotely with the use of the optional Volume Control with A/B Select User
Interface accessory�
English
e
r
t
IZA 190-HZ amplifier�
®
Setup and Operation
y
i
u
Installation and Operation Page 27