Table of Contents
Advertisement
Removing/Assembling the
Refrigerator Door Handles
NOTE
Removing the doors is always recommended when it
is necessary to move the refrigerator through a nar-
row opening. If it is necessary to remove the handles,
follow the directions below.
Removing the Handles
1
Loosen the set screws with a
remove the handle.
2
Only if required, loosen the mounting fasteners that
connect to the refrigerator door and handle using a
Allen wrench, remove the mounting fasteners.
Mounting
Fasteners
Set Screw
Allen
Wrench
Assembling the Handles
1
If already removed, assemble the mounting fasteners at
both ends of the handle using a
2
Place the handle on the door by fitting the handle foot-
prints over the mounting fasteners and tightening the set
3
screws with a
/
in. Allen wrench.
32
Mounting
Fasteners
3
/
in. Allen wrench and
32
1
/
in.
4
1
/
in. Allen wrench.
4
Removing/Assembling the
Freezer Drawer Handle
Removing Freezer Drawer Handle
Loosen the set screws located on the lower side
1
of the handle with a
/
8
and remove the handle.
NOTE
If the handle mounting fasteners need to be tightened
or removed, use a ¼ in. (6.4 mm) Allen wrench.
Replacing Freezer Drawer Handle
Place the handle on the door by fitting the handle
footprints over the mounting fasteners and
tightening the set screws with a
Allen wrench.
NOTE
If the handle mounting fasteners need to be tightened
or removed, use a ¼ in. (6.4 mm) Allen wrench.
INSTALLATION
in. (3.1 mm) Allen wrench
1
/
in. (3.1 mm)
8
11
Advertisement
Table of Contents
