LG MFL37933593 Owner's Manual page 6

6
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
To reduce the risk of fire, electric shock, or personal injury when using your product, basic safety precautions should be
followed, including the following.
CAUTION
Installation
The refrigerator must be properly installed in accordance with the Installer Instructions that were taped to the front of the
refrigerator.
Be careful when you unpack and install the refrigerator. Immediately dispose of packing materials (plastic) out of reach of
children.
Use
Close the door carefully when children are around.
Keep fingers out of pinch point areas; clearances between the doors and cabinets are necessarily small. Be careful closing
doors when children are in the area.
If you do not store or place food properly, beware that it may fall and cause injury.
Maintenance
Do not use strong detergents like wax or thinners for cleaning. Clean with a soft fabric.
Mild dishwashing liquids can be added to water to aid cleaning with a soft cloth.
WARNING
Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the
manufacturer.
Do not damage the refrigerant circuit.
Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recom-
mended by the manufacturer.
The refrigerant and insulation blowing gas used in the appliance require special disposal procedures. When disposal, please
consult with service agent or a similarly qualified person.
This appliance contains a small amount of isobutane refrigerant (R600a), natural gas with high environmental
compatibility, but it is also combustible. When transporting and installing the appliance, care should be taken to ensure
that no parts of the refrigerating circuit are damaged. Refrigerant squirting out of the pipes could ignite or cause an
eye injury. If a leak is detected, avoid any naked flames or potential sources of ignition and air the room in which the
appliance is standing for several minutes.
In order to avoid the creation of a flammable gas air mixture if a leak in the refrigerating circuit occurs, the size of the
room in which the appliance may be sited depends on the amount of refrigerant used. The room must be 1m
for every 8g of R600a refrigerant inside the appliance. The amount of refrigerant in your particular appliance is shown
on the identification plate inside the appliance. Never start up an appliance showing any signs of damage. If in doubt,
consult your dealer.
SAVE THESE INSTUCTIONS
2
in size