In Case Of Extended Electric Failure; Air Supply - J. A. Roby ATF727 Owner's Manual

IN CASE OF EXTENDED ELECTRIC FAILURE

Lift up the stem of the air intake and make it slip towards the interior so as to align its
holes with the holes at the front of the appliance, allowing a contribution or a reduction of
air, according to the needs. To measure out the air entry in the combustion chamber, you
have to rotate the handle; upwards for an opening and downwards for a closing It is
A new air supply can be done by the following ways:
Indirect method : In the case of an appliance not certified for a direct connection with a
source of new air supply, the new air is brought in a conduit at a maximum of 300mm (12
Po) of the appliance, in order to not compromise its operation.
Mechanic ventilation system : If the home is built with a ventilation system (air
exchange or heat recovery)
I. The ventilation system might be able to supply an efficient air quantity to a solid
combustible appliance, and
II. The owner should be informed that the ventilation system can have to be
rebalanced by a technician specialised in ventilation after the installation of the
solid combustible appliance..
important to lower the ventilation
door at the front so that heat can
spread out in the room. The
appliance will become much hotter
without
coming from the fans; thus the
ceilings, the walls and everything
around
exposed to an higher heat than
normal.

AIR SUPPLY

the circulation of
the appliance will
air
be
20