Seating; Lighting - J. A. Roby ATF727 Owner's Manual

Now that you have completed the installation of the appliance according to the
recommendations, you are ready for the lighting!
1. Place papers and small wood in the appliance.
2. Before lighting, be sure that the chimney is warm enough.
3. When the fire is well lit, gradually add bigger wood logs until an ember bed is
formed.
4. You can then control combustion by closing or opening the air intakes (a rod
pulled down indicates a closed air intake). The wood will burn more quickly if the
air intakes are opened to the maximum and more slowly if they are only slightly
open.
Do not charge the appliance beyond the bricks

SEATING

You must install a fireproof plate under the
appliance, which must exceed it of 18 inches
to the front, of 8 inches to the sides and of 8
inches at the back.
**** Use only non-combustible materials
such as ceramics, marble or granite.

LIGHTING

.
18