Clearances - J. A. Roby ATF727 Owner's Manual

CLEARANCES

Due to its reduced clearances, this appliance occupies a minimum of space in the room
where it is installed. No matter where you install it, this appliance will perfectly complete
your decoration by its originality and its heat. This appliance only needs a 12 inches
clearance at its back, 12 inches from the lateral walls and 18 inches from the ceiling. For
the plenums and heat exchanger, the clearances must be of 6 inches for the 6 first feet and
of zero thereafter.
If you place the plenums (4 exits of 6 inches or 2 exits of 8 inches plenums) in front of
the appliance, do not place the safety thermodisc under the plenum. The door's heat may
stop the appliance and the fans may not restart when the electricity returns; the
thermodisc being too hot.
12