Determining Basic Information Of Drive Frus - IBM System Storage DS5020 Installation, User's, And Maintenance Manual

Determining basic information of drive FRUs

IBM might ship drive FRUs of higher capacity than that of the drive FRUs they
replace. These new drives are programmed in manufacturing to give the same
capacity as the drive FRUs being replaced.
The new drive FRUs have different model IDs than the ones printed on the drive
manufacturer label. You can determine the model ID and other information of these
drives by referring to one of the following windows of the DS Storage Manager
software:
v Properties pane in the Hardware tab of the Subsystem Management window
v Storage Subsystem Profile window
You can also use the IBM hologram label to determine the drive capacity and the
drive FRU part number. A sample IBM hologram label is shown in the following
figure.
Table 23. Parts listing (DS5020 storage subsystem) (continued)
Index DS5020 storage subsystem
10 Cage assembly
Cable, fiber-optic, 1 m
Cable, fiber-optic, 5 m
Cable, fiber-optic, 25 m
LC wrap plug assembly
SFP (shortwave), 4 Gbps
OM3 fiber optic cable LC to LC 10 meter
SFP, 8 Gbps
Serial cable adapter
Line cord jumper, high-voltage
CRU P/N
59Y5249
39M5699
39M5700
39M5701
39M5914
22R6443
45W2222
49Y4123
39M5942
39M5377
Chapter 6. Hardware maintenance
169