Power Control; Digital Setup; Audio Setup - Sharp Aquos LC-42D62U Operation Manual

Hide thumbs Also See for Aquos LC-42D62U:
Table of Contents

Advertisement

Basic adjustment settings
Press ..
IT
to select "PCM" or "Dolby
Digital", and then press ENTER.
You can output digital audio to an AV amplifier or
similar device whose DIGITAL AUDIO INPUT terminal
is connected to the DIGITAL AUDIO OUTPUT terminal
on the TV. Please select an audio output format
compatible with the audio format of the program you
are watching and the equipment connected.
Press MENU to display the MENU screen,
and then press ......
/~
to select "Digital
Setup".
Press ..
IT
to select "Audio Setup", and then
press ENTER.
This setting allows you to optiillize the settings of
Digital broadcasting.
Press .....
/~
to select "Enable", and then
press ENTER.
• Five minutes before the power shuts down, the
remaining time displays every minute.
Press MENU to display the MENU screen,
and then press .....
/~
to select "Power
Control".
Press MENU to exit.
Press
~/T
to select "No Signal Off", and
then press ENTER.
Power control setting allows you to save energy.
No signal off
When set to "Enable", the power will automatically shut
down if there is no signal for 15 minutes.
• "Disable" is the factory preset value.
• When a TV program finishes, this function may not operate.
No operation off
When set to "Enable", the power will automatically shut
down if there is no operation for 3 hours.
The optical output terminal outputs
audio signal in PCM form. If your
digital audio system does not support
Dolby Digital, select "PCM".
The optical output terminal outputs
audio signal in Dolby Digital form.
It reproduces sound from surround
program of digital.
PCM
Dolby Digital
Press MENU to display the MENU screen,
and then press .....
/~
to select "Power
Control".
Press ..
IT
to select "No Operation Off", and
then press ENTER.
Press MENU to exit.
Press .....
/~
to select "Enable", and then
press ENTER.
• Five minutes before the power shuts down, the
remaining time displays every minute.
Press MENU to exit.
• "Disable" is the factory preset value.
@-28

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents