Toshiba Carrier RAV-SP180KRT-UL Installation Manual page 32

+001111052201_00Ta.book Page 31 Friday, November 20, 2009 11:45 AM
High-Wall Type
SW01: OFF ON SW01: ON
SW02: OFF SW02: OFF
1 2
Factory default After setting
B
5. Assemble the removed parts by reversing
steps 1 to 4.
Insert the sensors and motor lead (louver
motor, fan motor) into the original positions.
Connect the sensor and the motor lead certainly
back to the previous position. If they are not
properly connected, the system will not operate or
other errors may occur.
31-EN
ON
1 2
ON
1 2
MCC-1510
CAUTION
– 31 –
Installation Manual
Toshiba