installation & connection
external Day/night Switching Input
Day/Night mode of the camera can be switched by signal from an external device.
`
To use this function, <DAY/NIGHT> setting of the camera should be set to the <EXTERN>.
M
(Page 28)
motion Detection Signal out
Upon a motion detection, the port outputs signal for an external device for display or operation.
When a motion is detected, the port outputs 3.3V signal.
`
To use this function, <ALARM OUT> setting of the camera should be set to <ON>. (Page 33)
M
18_ installation & connection
POWER
HD-SDI Monitor