Advanced Picture Settings; C.m.s.-Hue; C.m.s.-Saturation; Colour Temp - Sharp AQUOS LC-32D77X Operation Manual

Watching TV

Advanced picture settings

The advanced settings enable you to set the picture
adjustment in more detail. There are ten options you
can choose from.
Press MENU and the MENU screen displays.
1
Press c / d to select "Picture".
2
Press a / b to select "Advanced", and then
3
press ENTER.
Press a / b to select the desired menu, and
4
then press ENTER.

C.M.S.-hue

C.M.S.-saturation

Colour temp.

Fine motion advanced

Film mode

Active contrast

DNR

3D-Y/C

Monochrome

Range of OPC

Press a / b or c / d to select the desired level,
5
and then press ENTER.
H C.M.S.-hue
This function adjusts the hue of a selected colour using
a six-colour adjustment system.
H C.M.S.-saturation
This function increases or decreases the saturation of
a selected colour using a six-colour adjustment system.
H Colour temp. (Colour temperature)
Adjusts the colour temperature to give the best white
image.
Selected item
High
Mid-High
Middle
Mid-Low
Low
H Fine motion advanced
Use Fine motion advanced to view fast-action images
more clearly.
Selected item
On For obtaining a clear image
Off No adjustment
H Film mode
Automatically detects a fi lm-based source (originally
encoded at 24/25 frames/second, depending on the
vertical frequency), analyses it then recreates each still
fi lm frame for high-defi nition picture quality.
NOTE
• Film mode is not selectable depending on the input signal
type.
52D77X.indb 35 52D77X.indb 35
Six-colour hue adjustments
+30
[ 0] –30
[ 0] –30 +30
+30
[ 0] –30
+30
[ 0] –30
[ 0] –30 +30
[ 0] –30 +30
Description
White with bluish tone
White with reddish tone
Description
H Active contrast
Automatically adjusts the contrast of an image
according to the scene.
H DNR (Digital Noise Reduction)
Reduces noise on screen and produces a clearer video
image. ("Off", "High", "Middle", "Low").
H 3D-Y/C
Provides high quality images with minimal dot crawl
and cross colour noise.
Selected item
Standard Normal adjustment
Fast Set the optimum image quality for fast-
moving images.
Slow Set the optimum image quality for slow-
moving images.
NOTE
• 3D-Y/C is not selectable depending on the input signal
type.
• 3D-Y/C may not operate depending on the input signal
type or noisy input signal.
H Monochrome
For viewing images in monochrome.
H Range of OPC
The brightness level range of the OPC sensor's
automatic adjustments can be set according to your
preferences. The adjustment range of the OPC sensor
can be set to a maximum of +16 and a minimum of -16.
Selected item
Max. -15 through +16
Min. -16 through +15
NOTE
• This function is available only when the OPC setting is set
to On or On: Display.
• The maximum setting cannot be set to a smaller number
than the minimum setting.
• The minimum setting cannot be set to a bigger number
than the maximum setting.
• The maximum and minimum settings cannot be set to the
same number.
• Depending on the brightness of the surrounding light, the
OPC sensor might not operate if the adjustment range is
small.
Description
Description
2/17/09 5:13:26 PM 2/17/09 5:13:26 PM
35