Using The Controller - Swann iFly Micro Lightning Quick Start Manual

Up/Down (Ascending/Descending)
The height of the helicopter is controlled by the throttle which varies the speed of the
spinning rotors.
Ascend
: Slide the throttle up to increase
the spinning speed of the rotors and make
the helicopter ascend.
Note
: To get good results, be gentle and subtle. Small adjustments made slowly and carefully
are the best way to get the helicopter to fl y well. Be careful when easing off the throttle – if the
helicopter stalls (that is, doesn't have enough lift to stay in the air) it'll fall, and might not be
able to recover in time, even if you jam the throttle back on.

Using the Controller

Descend
: Slide the throttle DOWN to
reduce the speed of the spinning rotors
and make the helicopter descend.
7