Table of Contents
Advertisement
Quick Start Guide
1.
Fully charge the iOS transmitter (see page 4)
and the helicopter (see page 5).
2.
Go to the Apple iTunes App Store.
3.
Search for the app called "Swann iFly".
Download and install the app. At the time of
writing, the app is free to download but you
will need an iTunes account.
4.
Tap the Swann iFly icon to run the app.
5.
Tap "Go" to start the app.
6.
Turn on the helicopter.
7.
Choose your helicopter by tapping the Swann
iFly Micro Lightning shown on the screen.
8.
Tap "OFF" to toggle the transmitter control
interface to "ON. "
9.
Plug the transmitter into the headphone jack
of your iOS device.
10. Turn up the volume on your mobile device to
maximum. The display should indicate you
are turning up the 'headphones' volume (NOT
the ringer or speaker volume). If this is not
done, a warning will prompt you to turn your
headphones volume to maximum.
11. Move the throttle control slowly up to send
power to the helicopter. The controller will
automatically fi nd a channel for the helicopter.
If more than one helicopter is within range,
make sure they are off or make sure you
have chosen a diff erent channel to any other
helicopter.
12. Adjust the trim control if needed to ensure the
helicopter fl ies straight
13. Use the fl ight control to control the direction of
the helicopter.
(i) INFORMATION
bottom right of the screen to get more information.
Quick Start Guide - iOS
: If you need additional help, you can tap the (i) button in the
7
8
9
10
3
Advertisement
Table of Contents
