Table of Contents
Advertisement
Troubleshooting
Can't control the helicopter.
Helicopter will not ascend.
Helicopter lands too fast
The transmitter does not charge
The helicopter does not charge
All trademarks are the property of their respective owners.
Specifications subject to change without notice.
For the latest version of this manual, please visit:
•
Ensure the transmitter is switched ON from the
iOS controller.
•
Ensure the helicopter is switched ON.
•
Try pairing the remote and the helicopter again.
•
Ensure the transmitter is fully charged.
•
Ensure the helicopter is fully charged.
•
Ensure the transmitter is securely attached to the
mobile device.
•
Replace the batteries in the remote control.
•
Do not fly the helicopter in high winds as this may
make it hard to control.
•
Another helicopter on the same channel is nearby.
Move away from the other device or make sure
each transmitter is set to a different channel ID.
•
The charge in the helicopter may be too low. You
will need to recharge the helicopter.
•
Check that you are providing enough throttle to
lift the chopper.
•
You are reducing the throttle too fast. Lower the
throttle gently to get a gradual descent to the
ground and a softer landing.
•
Ensure the helicopter is fully charged.
•
Ensure you are using the correct USB charging
cable for the transmitter (round plug)
•
Ensure you are using the correct USB charging
cable for the helicopter (twin socket).
www.swann.com
15
Advertisement
Table of Contents
