Fuses - SMART fortwo coupe Operator's Manual

Not moving the gear selector lever to
R
neutral position N may result in
significant transmission damage.
in a discharged battery.
R

Fuses

The electrical fuses in your vehicle serve
to switch off malfunctioning power
circuits.
If a fuse is blown, the components and
systems secured by that fuse will stop
operating.
G
Warning!
Only use fuses approved by smart with the
specified amperage for the system in
question and do not attempt to repair or
bridge a blown fuse this may cause an
overload leading to a fire, and/or cause
damage to electrical components and/or
systems. Contact a smart center if you
encounter any electrical problems.
!
A blown fuse must be replaced by an
appropriate spare fuse (recognizable by
its color or the fuse rating given on the
fuse) of the amperage recommended in
the fuse chart. Any smart center will be
glad to advise you on this subject.
If a newly inserted fuse blows again, have
the cause determined and rectified at an
authorized smart center.
Before replacing fuses:
Engage the parking brake.
R
Make sure the gear selector lever is in
R
park position P.
Turn off all electrical accessories.
R
Turn off the engine.
R
Remove the key from the starter switch.
R
Replacing a fuse
The fuse box is located on the driver's side
below the dashboard.
X
From the fuse chart (
determine which fuse belongs to the
malfunctioning accessory or component.
X
Remove the respective fuse.
X
Replace the defective fuse with a new one
of the same amperage.
Fuses
Y
page 196),
Z
193