Remote Control Functions - Audio Research VSi75 User Manual

14
Operation

Remote Control Functions

In addition to the functions on the front panel, the handheld remote also
offers the following functions:
MONO: Toggles the VSi75 between Stereo and Mono mode. "STEREO"
or "MONO" are displayed in the bottom right of the LCD display, indicating
mode.
1-5: Provides direct access to any of the five single-ended inputs on the
VSi75.
DISP UP/DISP DOWN: Adjust the brightness of the backlighting on the
LCD display. Fifteen levels of illumination plus off are available. When off
is selected, the display will illuminate for five seconds, after which there will
be only a green dot in the middle of the screen. Pressing any button on the
front panel or remote will reactivate the screen for another five seconds.
HOURS: Toggles between main display screen and vacuum tube hours
meter. The hours meter can be reset to 0 after replacing the vacuum tubes;
to do so, remove the four screws on the top panel, and take the panel off.
At the front left of the circuit board, there is a small black "RESET" switch.
Press and hold this switch to reset the meter.