Page 1
Owner’ s Manual Model VS60 STEREO POWER AMPLIFIER 3900 ANNAPOLIS LANE NORTH / PLYMOUTH, MINNESOTA 55447-5447 / PHONE: 763-577-9700 FAX: 763-577-0323 www.audioresearch.com...
Page 3
Model VS60 ® MODEL VS60 HIGH DEFINITION VACUUM TUBE AMPLIFIER POWER CAUTION FOR PROTECTION AGAINST FIRE HAZARD REPLACE ONLY WITH SAME RATED FUSES. MODEL VS60 +12V PLYMOUTH, MINNESOTA WARNING STEREO AMPLIFIER TO PREVENT FIRE AND SHOCK HAZARD, DO NOT MADE IN U.S.A.
Unpacking 2. If you are using the optional tube cover, be sure the VS60 The VS60 is packed in a heavy-duty carton with special is first turned off and then remove the top plate with the foam inserts for maximum protection.
For the very best sonic performance on domestic 100 or It is normal for a vacuum tube power amplifier to run quite 120 volt circuits, the VS60 should be connected to its own warm, and if used for prolonged periods, hot to the touch.
Audio trol signal. Research Customer Service at (763)-577-9700. The front power rocker switch on the VS60 must be off to Output Tube Bias Adjustment use the remote turn-on. The front power rocker switch may still be used when the remote turn-on is connected, but the As shipped from the factory, the output “bias”...
50Hz) 320 watts at rated output, 500 watts maximum, 200 In the unlikely event that technical service beyond the abil- watts at “idle” . ity of the importer is required, Audio Research will fulfill REMOTE START: 12VDC at 17mA the terms and conditions of the Limited Warranty. Such product must be returned at the purchaser's expense to the TUBES REQUIRED: 2 –...
Need help?
Do you have a question about the VS60 and is the answer not in the manual?
Questions and answers