• I mages may differ in appearance from the actual product. • C ontent may differ from the final product and is subject to change without prior notice. For the latest version of the manual, refer to the Samsung website, www.samsung.com . Instructional icons...
Table of Contents Getting started Headset layout Buttons Package contents Charging the headset Turning the headset on and off Turning the indicator light on and off Wearing the headset Using the headset About Bluetooth Optimal usage conditions Pairing and connecting the headset Connecting to multiple devices Reconnecting and Disconnecting Call functions...
Getting started Headset layout Talk button Indicator light Volume button Earpiece Secondary microphone Power switch Charging jack Primary microphone Buttons Button Function Power • S lide to turn the headset on or off. switch • P ress and hold for 3 seconds to enter Pairing mode. •...
Use the Portable charger to charge the headset. You can charge the headset once with the fully charged Portable charger. Use only Samsung-approved chargers. Unapproved chargers can cause the battery to explode or damage the headset. When the battery level is low, the indicator light flashes red and the headset beeps.
Page 6
• I f the Portable charger is not charging properly, take the Portable charger and the charger to a Samsung Service Centre. • T o save energy, unplug the charger when not in use. The charger does not have a power switch, so you must unplug the charger from the electric socket when not in use to avoid wasting power.
Page 7
Getting started Charging the headset Open the Portable charger and attach the headset. Insert the headset into the Portable charger, until the earpiece is firmly set in place and the earpiece is solidly braced by the charger frame. If the headset is not fixed to the Portable charger, it might not charge properly or might fall off when the Portable charger is opened.
Page 8
Getting started Turn on the Portable charger by sliding the Power switch on, and then close it. You can charge the headset and the Portable charger at the same time. With the headset attached to the Portable charger, connect the charger to the Portable charger and turn it on.
Getting started Checking the battery level Press and hold the Volume down button and the Talk button at the same time to check the battery level. The indicator light flashes five times in one of the following colours, depending on the battery level: Colour Battery level Blue...
Getting started Wearing the headset Wear the headset as the image below. Use one of the provided ear tips that fit your ear. Attach the back of the ear tip to the front of the earpiece, with the gray ring pointed in. Rotate the ear tip left or right slightly depending on which ear the headset will be worn on.
Using the headset About Bluetooth Bluetooth is a wireless technology standard that uses a frequency of 2.4 GHz to connect to various devices over short distances. It can connect and exchange data with Bluetooth devices, such as mobile devices, computers, printers, personal digital assistants (PDAs), and other digital home appliances, without connecting via cables.
Using the headset Optimal usage conditions To ensure you get the best performance from the headset: • D o not block or create a barrier between the devices. Human body can interfere with the Bluetooth signal. • D o not touch the transmitting/receiving part of the connected device. •...
Page 13
Using the headset Activate Bluetooth on the mobile device, scan for the device, and then select the headset name “HM7100” from the list of available devices. For more details, refer to the mobile device’s user manual. If requested, enter the Bluetooth PIN 0000 (4 zeros) to pair and connect the headset to the mobile device.
With a mobile device connected, enter Pairing mode again. Activate Bluetooth on the secondary mobile device, scan for the device, and then select the headset name “HM7100” from the list of devices. If requested, enter the Bluetooth PIN 0000 (4 zeros) to pair and connect the headset to the mobile device.
Using the headset Connecting to multimedia devices The headset can pair and connect with other Bluetooth-enabled multimedia devices, such as a computer or an MP3 player. When the headset is connected to both mobile and multimedia devices, you can make or receive a call from the mobile device while listening to music from the multimedia device.
Using the headset Call functions Connect the headset to a mobile device and use it when making or answering a call. • A vailable call functions may differ from connected device to device. • I f your headset is connected to two devices at the same time, some features may not be available.
Using the headset Using options during a call Adjusting the volume During a call, press the Volume up or down button. The headset beeps when the volume reaches its lowest or highest level. Muting the microphone Mute the microphone so that the person to whom you are speaking cannot hear you. During a call, press and hold the Volume up or down button.
Using the headset Using voice prompts Voice prompts inform you about the current status of the headset and usage informations. If you cannot hear any voice prompts, make sure the voice prompt feature is turned on. Turning the voice prompts on or off •...
Using the headset Resetting the headset When the headset is paired with a mobile device, it automatically saves connection and feature settings, such as the Bluetooth address or device type of the mobile device. To reset the connection settings saved in the headset, enter Pairing mode, press and hold both Volume buttons and the Talk button at the same time for 3 seconds.
Appendix Specifications Item Specifications and description Bluetooth Version Headset Profile (HSP), Hands-Free Profile (HFP), Advanced Audio Support profile Distribution Profile (A2DP) Operating range Up to 10 metres Standby time Up to 160 hours Talk time Up to 4 hours* Play time Up to 4 hours* Portable charger: Approximately 2 hours Charging time...
Appendix Frequently asked questions Question Answer The headset and the charger may not have been connected The headset does not properly. Separate the headset from the charger, reconnect, and fully charge. charge the headset. I cannot use all the Available features may vary depending on the connected features described in device.
Appendix Warranty and parts replacement Samsung warrants this product as free of defects in material, design and workmanship for a period of one year from the original date of purchase.* If during the period of warranty this product proves defective under normal use and service you should return the product to the retailer from whom it was originally purchased or a qualified service centre.
Page 23
Some content may differ from your device depending on the region, and is subject to change without prior notice. www.samsung.com English (EU). 05/2013. Rev. 1.1...