Advertisement
Installing your amplifier
Aerial signal distribution
1. Connect your UHF aerial downlead to the IN
UHF socket and connect your FM/DAB aerial
downlead (if applicable) to the IN FM socket on
the amplifier.
2. Connect your TVs and FM tuners to any of the
DAB Radio/Tuner
Note: Leads shown
are not Supplied
TV
TV
TVs with built-in
Freeview™ Receivers
SLxB TV sockets in any combination.
If your TV does not have a built-in Freeview™
receiver you will need to connect your TV to the
amplifier via a Freeview™ set top box.
TV
Aerial
ANT IN
DAB
Aerial
TV
Freeview™
Receiver/PVR
Advertisement
