PROEL FLASH12A-V2 User Manual page 13

"punch", or to reduce the low frequency rise when the speaker is set near walls or on fl oor as stage monitor.
8. HIGH control
This control gives you up to 6 dB boost or cut at 8 KHz with a "SHELVING" curve shape. Use it to add or reduce the sound
"clarity" and "brightness".
9. SIGN/LIMIT indicator
GREEN LED illuminates to indicate the presence of the signal at the amplifi er input.
RED LED illuminates when the internal amplifi er's output is limited. When this LED fl ashes reduce the input signal
level.
10. ON indicator
GREEN LED: when lighted indicates amplifi er has been turned on and AC power is available.
11. POWER switch
Speaker is "ON" when the switch is in the "I" posi on, use this switch to set the speaker power to ON or OFF.
NOTE: When you shut down your equipment, turn off the speaker fi rst. When powering up, turn on the speaker last.
12. FUSE holder
Here is placed the mains protec on fuse.
Please follow the instruc ons on page 4 of this manual to replace it.
13. AC~ socket
Here's where you plug in your speaker's mains supply cord. You should always use the mains cord supplied with the
speaker. Be sure your speaker is turned off before you plug the mains supply cord into an electrical outlet.
14. PRODUCT LABEL
In this label are wri en the most important informa on about the loudspeaker: model, line voltage, consump on, serial
number.
13