Operation; Engine And Snow Thrower Operating Controls - Husqvarna 521SSE Operator's Manual

KNOW YOUR SNOWTHROWER
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR SNOWTHROWER. Compare the
illustrations with your SNOWTHROWER to familiarize yourself with the location of various controls and adjustments. Save
this manual for future reference.
Chute Deflector
Discharge Chute
Auger
The engine operating controls and their functions are as
follows:
Auger Drive Lever − Starts and stops the auger.
Chute Control Rod − Changes the direction of snow throw-
ing through the discharge chute.
Chute Deflector − Changes the distance the snow is thrown.
Discharge Chute − Changes the direction the snow is thrown.
1740274

OPERATION

Auger Drive Lever
Chute Control Rod

ENGINE AND SNOW THROWER OPERATING CONTROLS

Recoil
Starter
Handle
Ignition Switch Key − Must be inserted and turned to the ON
position to start the engine. Turn key to the OFF position to
stop the engine.
Recoil Starter Handle − Starts the engine manually.
Electric Starter Button − (Not shown) On electric start mod-
els, use to start the engine when using the 120V electric start-
er.
Choke Control − Used to start a cold engine.
Primer Button − Injects fuel directly into the carburetor man-
ifold for fast starts in cold weather.
13
Recoil
Primer
Starter
Button
Ignition Switch
Choke Control
Key
Figure 7