Table of Contents
Advertisement
8.2 Current consumption measurement
A
C
HTC confidential
© 2001, HTC Corporation. All rights reserved.
B
D
E
1. Equipment requirement
A. Power Supply (set at 4 V /1A).
B. Micro-Current Meter
(support 0.5mA ~ 1A at least).
2. Fixture requirement
C. Current series jig.( with black and
D. Cable
E. Battery with extension cable
3. Connect cable (D) to positive polarity of
power supply (A) and current meter (B)
4. Connect cable of fixture( C ) to negative
polarity of power supply (A) and current
meter (B)
Note : black cable to power supply (A)
and red cable to current meter (B)
TOTAL 84
red cable)
CONT.ON. 43 PAGE NO. 42
Advertisement
Table of Contents
