Download Print this page
JL Audio StealthMod SMS-B-X5E70 Installation Manual

JL Audio StealthMod SMS-B-X5E70 Installation Manual

2007 - up

Advertisement

Quick Links

StealthMod
I N S T A L L A T I O N G U I D E
for the
SMS-B-X5E70
SKU# 94518
2007 - Up
Thank you for choosing a JL Audio StealthMod
proper installation, your new vehicle-specific enclosed subwoofer system will deliver
years of listening pleasure.
We strongly recommend that you have your new StealthMod
authorized JL Audio dealer. The installation professionals employed by your dealer have
the necessary tools and experience to disassemble and reassemble your vehicle properly.
Also, keep in mind that your warranty coverage extends to 2 years if your system is
installed or approved by your authorized JL Audio dealer. If you prefer to perform your
own installation, please read this installation guide completely
before beginning the process.
®
for your automotive sound system. With
®
system installed by your
®
If you choose to perform the installation yourself, it is absolutely vital that the
StealthMod
®
system be properly mounted to the vehicle according to these
instructions. Failure to mount the enclosure properly presents two problems:
1) The sub-bass performance will suffer due to the movement of the enclosure
caused by the force exerted by the woofer(s).
2) A loose enclosure presents a serious safety hazard in the event of a collision
or sudden deceleration.
SMS-B-X570 INSTR_SKU# 11339
INSTALLATION
D I F F I C U L T Y :
5
OUT
OF
ESTIMATED TIME:
4-5 HOURS
S T E P 1
Roll down the window and open the passenger door.
S T E P 2
Carefully pry up on the trim piece around the release handle
and remove it from the vehicle.
S T E P 3
Remove the screw behind the panel.
Continued on Next Page
5

Advertisement

loading

Summary of Contents for JL Audio StealthMod SMS-B-X5E70

  • Page 1 Also, keep in mind that your warranty coverage extends to 2 years if your system is installed or approved by your authorized JL Audio dealer. If you prefer to perform your own installation, please read this installation guide completely S T E P 3 Remove the screw behind the panel.
  • Page 2 Tape, aligning the holes with the clip and speaker mounting hole. Secure the bracket to the door panel with the screw removed in Step 9. Page 2 • JL Audio, Inc 2012 Continued on Next Page...
  • Page 3 Extend the positive and negative tweeter wires as necessary, and onnect them to the Tweeter Output (T+ and T-) of the Crossover. Plug in the factory harnesses and reinstall the door panel. Page 3 • JL Audio, Inc 2012 Continued on Next Page...
  • Page 4 1/4” - 20 x 1” Bolts to secure the Side Bracket to the right arrow as shown. Stealthbox®. Page 4 • JL Audio, Inc 2012 Continued on Next Page...
  • Page 5 Align the Amplifier Bracket to the factory studs as shown, Remove the three clips that hold the storage pocket in place and secure it to the vehicle using three 5mm Hex Nuts as and remove the pocket. indicated. Page 5 • JL Audio, Inc 2012 Continued on Next Page...
  • Page 6 CL-SSI to the XD700/5 along with the main Red Power Wire and Black Ground Wire as indicated on the amplifier. Page 6 • JL Audio, Inc 2012 Continued on Next Page...
  • Page 7 Reinstall the side panel. S T E P 4 7 Cut the Foam Tape into three 4” strips, affix them to the new Battery Cover, and trim away the excess as shown. Page 7 • JL Audio, Inc 2012 Continued on Next Page...
  • Page 8 . j l a u d i o . c o m All specifications are subject to change without notice. “JL Audio®” and the JL Audio logo, “Stealthbox” and the Stealthbox logo are registered trademarks of JL Audio, Inc. “Ahead of the Curve” and its respective logo is a trademark of JL Audio, Inc.