Installation - Electrical Connections - GE JGSP48 Installation Instructions Manual

Gas slide-in range
Hide thumbs Also See for JGSP48:
Table of Contents

Advertisement

ELECTRICAL CONNECTIONS
INSTALLATION – ELECTRICAL
10
CONNECTIONS
Because of potential safety hazards
A
under certain conditions, we strongly
recommend against the use of an
extension cord. However, if you still
elect to use an extension cord, it is
absolutely necessary that it is a UL
listed 3-wire grounding-type appliance
extension cord and that the current
carrying rating of the cord in amperes
is equivalent to or greater than the
branch circuit rating. Such extension
cords are obtainable through your local
appliance dealer.
IMPORTANT: (Please read carefully)
FOR PERSONAL SAFETY, THIS
APPLIANCE MUST BE PROPERLY
GROUNDED.
An adequate electrical supply and
B
outlet must be used to operate the
electrical parts of your range.
• The power cord of this appliance is
equipped with a three-prong (grounding)
plug which must be used with a properly
grounded three-hole outlet with standard
120 Volt, 60 cycle AC household current.
• When a standard two-prong wall
receptacle is encountered, it is the
personal responsibility and obligation of
the customer to have it replaced with a
properly grounded three-prong wall
receptacle by a qualified electrician.
Do not under any circumstances cut or
remove grounding prong from the range
cord. Failure to provide proper ground may
create a hazardous condition.
Installation Instructions
7

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JGSP48 and is the answer not in the manual?

This manual is also suitable for:

Jgs968

Table of Contents