Remote Features - Viper 3606V Owner's Manual

Press the
8.
9. Wait several seconds as the remote generates a security encryp-
tion and sends it to the Control Center. The siren chirps to indi-
cate Pairing is complete.
If pairing is not successful press and release the
and then repeat steps 7 and 8.
Pairing will exit if:
• Step 7 is not completed within 60 seconds
• The doors are closed
• The ignition is turned off.

Remote Features

Enter programming to access the main menu as previously explained,
then from the main menu, press and hold the
remote operation features, two transmit LED flashes indicate the remote
features menu is accessed. Press the buttons indicated in the tables
below to set the feature option.
The remote control will flash the Transmit LED to indicate the setting.
Feature
Keypad Lock
Button Beeps
Car 2
* Indicates default setting.
14
button.
Button Press Single Flash Double Flash
Auto Off *
On* Off
Car 2 On Car 2 Off *
© 2013 Directed. All rights reserved.
button once
button to access the