Installation Of Stb; First Steps; Menu Information - Xcruiser XDSR57FTA User Manual

This section explains the installation of the receiver.
Refer to the manuals supplied with the equipment
the installation of outdoor equipment such as the dish
antenna when adding new equipment, be sure to refer
to the related parts of the manual for the installation.

FIRST STEPS

lnsert the plugs of the receiver's and the auxiliary
equipments in the power socket and switch them on.
Select the AV mode on the TV set.
The receiver is delivered with pre-programmed TV
channels and can be used immediately. To see if there
are any new channels, then activate channel search.
CAUTION!
Check the connections of all equipment and the
antenna are in working order berore connecting the
receiver to the power source.
www.xcruiser.net
8

MENU INFORMATION

The user interface has various ways to navigate
through the menus and functions.
Some of the keys on the remote control unit give
direct access to functions. The most important keys
are identified as EPG, colored keys, MENU and OK.
Other keys are multi-functional which means that their
function changes dependent of the mode that you are
in unless otherwise specified; this note explains the
way you can navigate through the pages of the user
menu.
• Use the
from one line to another line.
• Use the
from one line to anotherr line
• Use the OK key to enter the sub-menu.
• Use the EXIT key to leave the menu and return to
view mode.
ln a sub-menu:
• Use the
programmed options in the sub-menu.
• Use the OK key to confirm the selection.
• The yellow cursor indicates the active selection.
keys to move the cursor up or down
keys to move the cursor left or right
keys to select one from the pre-
XDSR57FTA