Lnstallation; Auto Scan; Add Satellite; Edit Satellite - Xcruiser XDSR57FTA User Manual

2. INSTAllATION

2.1 Auto Scan

1. Press OK to enter the Auto
Scan menu.
2. Press OK to deploy the satel-
lite list.select the satellite you
want to scan with pressing
t
he satellite will be
marked with the satellite You
can also press to select the
satellite.
3. Select the desirde mode for
searching and then press OK
to start search channel auto-
maticly.
4. You can also ente the Edit
Satellite to reset the current
satellite.
www.xcruiser.net

2.2 Add Satellite

Satellite: Press OK to enter the
submenu. Rename the name of
the new satellite. Press MENU to
exit this menu
LNB Type: Select proper LNB type
using the Arrow keys according
go your physical LNB type.
LNB Freq (1,2): Enter the proper
LNB frequency referring go your
LNB using the Numeric Keys on
the Remote control unit.
LNB Power: Select the desired
option. If your STB is connected
to another receiver through LOOP
ThROUGh support ,you should
check which receiver isconnected
directly to the LNB. ln case the
12
other receiver is directly connected
to the LNB, then select OFF.
22K: 22Khz control is
automatically set for each LNB
alternative. If "Universal" is
selected, 22Khz control should be
"Off State".
DiSEqC: Select the port number
to get the RF signal from the LNB
which isc onnected to DisEqC
switching box.

2.3 Edit Satellite

Satellite: Press OK to deploy the
satellite list. Select the satellite you
want to check with pressing
. You can also press to select the
satellite.
LNB Type: Select proper LNB
type using the Arrow keys
according to your physical LNB
type.
LNB Freq (1,2): Enter the proper
LNB frequency referring to your
LNB using the numeric keys on
the Remote control unit.
LNB Power: Select the desired
option. If your STB is connected
to another receiver through LOOP
ThROUGh support, you should
check which receiver is connect-
ed directly to the LNB.ln case the
receiver is directly connected go
the LNB, then select OFF.
22K: 22Khz control is automati-
cally set for each LNB alternative.
If "Universal" is selected, 22Khz
control should be "Off State".
DiSEqC: Select the port number
to get the RF signal from the LNB,
which is connected,to DiSEqC
seitching box.
Positioner: To set satellite
position.
XDSR57FTA