Installation Guide Viking Range, LLC 111 Front Street Greenwood, Mississippi 38930 USA (662) 455-1200 For product information, call 1-888-845-4641 or visit the Viking Website at vikingrange.com Built-In Gas Cooktops F21263A EN (010314)
Table of Contents IMPORT NT – Please Read and Follow Your safety and the safety of others is Warnings & Important Safety Instructions _______________________________________________3 very important. • Before beginning, please read these Dimensions _________________________________________________________________________6 instructions completely and carefully. Specifications _______________________________________________________________________7 We have provided many important safety Cutout Dimensions __________________________________________________________________8 messages in this manual and on your...
Page 3
IMPORT NT – IMPORT NT – Please Read and Follow Please Read and Follow DANGER WARNING WARNING FIRE/EXPLOSION CHEMICAL HAZARD ELECTRICAL GROUNDING HAZARD INSTRUCTIONS If not installed, operated and maintained in accordance IF THE INFORMATION IN The cooktop must be electrically grounded with the manufacturer’s THIS MANUAL IS NOT in accordance with local codes or, in the...
Dimensions Specifications Gas Cooktops Description 30” W. Model 36” W. Model Overall width 30-3/4” (78.1 cm) 36-3/4” (93.3 cm) Overall height from bottom 5” (12.7 cm) to top of grate Overall depth from rear 21” (53.3 cm) Cutout width 27-3/4” (70.5 cm) min. to 33-3/4”...
Clearance Dimensions Clearance Dimensions (Proximity to Cabinets) (Wood/Composite Overlay) The bottom of a standard hood should be Proximity to Side Cabinet Installation Minimum Clearances from Adjacent 30” (76.2 cm) min. to 36” (91.4 cm) max. • The cooktop may be installed directly to Combustible Construction above the countertop.
Electrical & Gas Requirements Electrical & Gas Requirements Electrical Requirements Rigid Connections: Initial Ignition of Burners There is no connection necessary beyond Manual shut-off valve: • Incoming gas is brought from an intake All cooktops are tested before leaving the plugging the unit into a polarized, •...
General Information Installation Electrical Requirement CAUTION Normal grounded household current, BURN HAZARD 120 volts, 60 Hz, 15 amps, single phase. The use of cabinets for storage above the Electrical installation should comply with appliance may result in a potential burn national and local codes.
Gas & Electrical Connection Final Installation Final Preparation • New units are cleaned at the factory • All stainless steel parts should be wiped Bracket Installation to remove any visible signs of dirt, oil, regularly with hot, soapy water grease, etc. remaining from the and with a liquid cleanser designed for manufacturing process.
Only authorized replacement parts may be used in performing service on the appliance. All servicing should be referred to a qualified technician. Contact Viking Range, 1-888-845-4641, for the nearest service parts distributor in your area or write to: VIKING RANGE, LLC...