Make Sure Thermostat Is Connected - Honeywell RTH6500WF Wi-Fi Series Quick Start Manual

2.3 Make sure your thermostat is
connected
While the connection is in process, your
thermostat will flash Wait for up to 3 minutes.
When the connection is complete, the
display will show Wi-Fi Setup Connection
Success. The Wi-Fi signal strength will
appear in the top-right corner.
After about 60 seconds, the home screen
will appear and Register at Total Connect
will flash until Step 3 (registration) is
complete.
If the thermostat displays Connection
Note:
Failure or continues to display Wi-Fi Setup,
confirm you correctly entered your home
network password in step 2.2c.
refer to the FAQ at wifithermostat.com/support
If correct,
17
M33875
M33876