Taking A Picture - Kodak EasyShare Z885 User Manual

Taking pictures/videos

Taking a picture

1
On/Off
2
Using the framing marks to take pictures
Framing marks indicate the camera focus area. The camera attempts to focus on
foreground subjects, even if the subjects are not centered in the scene.
NOTE: Multiple framing marks may appear when faces are detected in Smart Scene mode
Framing marks
NOTE: Framing marks do not appear in some SCN (scene) and Video modes. When you use AF Zone and
set Center Zone
8
3
Use the LCD.
Press
• Status icons
• Help (when in Menu)
• Histogram (when in P/M mode)
1 Press the Shutter button halfway.
When the framing marks turn green, focus is
accomplished.
2 If the camera is not focusing on the desired subject
(or if the framing marks disappear), release the
Shutter button and recompose the scene.
3 Press the Shutter button completely down to
take the picture.
(see page 40), the framing marks are fixed at Center Wide.
LCD/Info
to turn on/off:
www.kodak.com/go/support
4
Press the Shutter button halfway
to focus and set exposure.
When the Ready light turns green,
press the Shutter button
completely down.
(see page 5).