Detection Systems DS7080iP-32 User Manual page 38

Custom Arming
[PIN] + [#] [4] Arms _____________________
Force Arming
Enter an arming command sequence followed
by the [Bypass] key. The maximum number of
zones that can be forced armed is
__________
Zone Bypass
[PIN] + [Bypass] followed by the 2-digit Zone
number.
Quick Arming Your System
Normal Arming: [#] + [On]
Perimeter Arming, no entry delay:
[#] + [No Entry] + [Perimeter Only]
Perimeter Arming, with entry delay:
[#] + [Perimeter Only]
Maximum Security Arming:
[#] + [No Entry] + [On]
Turning Off (Disarming) Your System
Enter your [PIN] followed by [Off]
System Features Reference Guide (continued)
Chime Mode
[PIN] + [#] [7]
Zone Test
[PIN] + [#] [8] [1]
Read Event History
[PIN] + [#] [8] [9]
Battery Test
[PIN] + [System Reset]
Communicator Test
[PIN] + [#] [8] [2]
Fire Reset
[PIN] + [System Reset]
Fire Trouble
[PIN] + [Off] to silence, [PIN] + [System Reset]
to clear
Remote Program Dial-out
[PIN] + [#] [8] [3]
Remote Program Answer
[PIN] + [#] [8] [6]
Local Battery/Sounder Test
[PIN] + [#] [8] [5]
Error Display
[PIN] + [#] [8] [7]
Error Display Reset
[PIN] + [System Reset]
Clear Zone Bypass
[PIN] + [Bypass] [*] to clear
Access Control
[PIN] + [Off]
Set Delayed Arming
[PIN] + [#] [9] [9]
Delay Auto Arm by 30 Minutes
[PIN] + [OFF]
Select Partition 1 only Arming/Disarming
[PIN] + [#] [#] + [Arm Sequence]
Select Partition 2 only Arming/Disarming
[PIN] + [#] [#] [#] [#] + [Arm Sequence]
- Page 38 -