Table of Contents
Advertisement
ordinary phone cables, this one flips the order of the wires. You
can tell a tracking cable from an ordinary cable by noting that with
tracking cables the tines that lock the RJ-11 jack into the receptacle
are both on the same flat side of the cable or when the ends are put
side by side the colored wires inside are in opposite order on the
two connectors.
Software – We include several CD-ROMs with the ST-i but the most
important one is labeled "SBIG Software and Catalog". This
disc contains the drivers and CCDOps software you'll need to use
the camera.
Overview and Connections
GUIDE PORT: This is where you connect the supplied 6 conductor
modular phone style cable to the Autoguider (sometimes labeled "CCD")
input port on your mount when using the ST-i as an autoguider, or when
using Track & Accumulate with mount corrections (see the CCDOPS
Manual for details of this mode
USB and POWER: Attach the 15-foot USB cable to any USB port on
your computer AFTER you have installed the drivers and software for the
ST-i. The USB port also provides power to the camera.
SBIG ST-i Manual
3
Advertisement
Table of Contents
