Santa Barbara Instrument Group ST-i Operating Manual page 12

g. Quit the Device Manager.
4. Install the new DriverChecker64 software.
a.
5. Run the DriverChecker64 software.
a.
b. Answer the question about your ST cameras.
6. Click the Update button to copy the new drivers to your system.
Link your old cameras to the new drivers.
a.
b. When the Add New Hardware Wizard comes up select
c.
d. If Windows asks you for the best match select any of the
e.
f.
When you're all done your camera should show up in the Device Manager
in the SBIG USB Devices section as shown below:
Updating CCDOps and Drivers
We are constantly adding new features and fixing software bugs in our
software, which is available for free download from our web site. You
should periodically visit our website to check for updated versions of the
CCDOps software and you should also periodically run the Driver Checker
to download and update your drivers. To find the latest software and
drivers, go to:
http://www.sbig.com -> Software Downloads
SBIG ST-i Manual
Use the installer that came with your camera or download
it from our web site:
<www.sbig com>
From the Start menu select the DriverChecker64 item in
the SBIG folder.
For each type of SBIG Camera you own (ST, STL, ST-
402), power up the camera one at a time and then attach it
to the PC with the USB cable.
"No, not this time" when it asks if it can connect to
Windows Update then click Next.
Select "Install the software automatically" and click
Next.
entries with Version 2.41.0.0 then click Next.
Click Finish and then you'll have to go through steps b
through d one more time for this camera.
Repeats steps a through f for each SBIG camera.
10