Trunk Setting - D-Link DGS-1248T Manual

Port Egress Setting:
The Port Egress is used to set the 802.1Q VLAN Egress rule in each port; the
selected port will include the TCI (Tag Control Information) data packets.
Figure 21. Port Egress Setting

Trunk Setting

The Trunk function enables the Switch to cascade two or more devices with
larger bandwidths.
There are ten Trunking groups to be set, and there are default ports in each
member. Click "Enable" to use the trunk function, select the ports in each
member to be trunk, and click "Apply" to activate the selected trunk group.
Figure 22. Trunk Setting
Be sure that the selected trunk setting port is connected to the device with a
same VLAN group.
24