NETWORK
When a security code is already set
PIN (Personal Identification Number)
If you want to connect the AP (Access Point) or router with PIN, use this feature.
Selecting AP
Select AP you want to connect.
Input the new SSID
iptime
ASW
Network1
ꔅ Connecting with PIN mode
ꕉ Previous
Repeat step 1-6 on P.21.
1
2
Connect the acccess point with PIN
RED
mode.
3
You can see the Network ID and Security Key
on your TV screen.
Enter the PIN number to your device.
Simple setting (WPS-button mode)
Use the simple setting if your access point or wireless router supports a PIN or WPS (Wi-Fi Protected
Setup)
Select the wireless network setting type.
Select the wireless network setting type.
Setting from the AP list
Simple setting (WPS-button mode)
Setting Ad-hoc network
ꕉ Previous
1
Repeat step 1-4 on P.21.
2
Select Simple setting (WPS-
ENTER
button mode).
22
Page 1/1
Access Point
Search
ꔉ Next
ꕯ
Exit
Simple setting (WPS-button mode)
Press PBC Mode button of AP and press 'Connect' button.
Caution: Check if PBC mode button is available for your AP.
ꔉ Next
ꕉ Previous
ꕯ
Exit
Connecting with PIN mode
Insert PIN number at the AP webpage and
press 'Connect' button.
PIN NUBMER : 12345670
Connect
For more information, check the AP manual.
ꔉ Next
ꕉ Previous
ꕯ
Exit
4
Select Connect.
ENTER
5
Repeat step 4-5 on P.18.
ꔛ
PIN number is the unique 8 digit number
of the dongle.
Connect
ꔉ Next
ꕯ
Exit
3
Select Connect.
ENTER
Repeat step 4-5 on P.18.
4
Need help?
Do you have a question about the 47LX9500 and is the answer not in the manual?