Download Print this page

Connection Guide - Swann SW322-YDX Operating Instructions Manual

Extra camera for adw-200 advanced digital wireless system

Advertisement

Connection Guide

Note that this connection diagram assumes that you have all the
components which came with the ADW-200 set containing the receiver.
Steps 3 ~ 12 refer to the connection of the receiver. If you've already set up the
receiver and are just adding another camera, only steps 1 & 2 are relevant.
1
Connecting the Camera
1.
Connect the antenna to the rear of the camera.
2.
Connect the supplied power adapter (5V) to the
power input on the camera, and plug the power
adapter in to a wall socket.
Connecting the Receiver
3.
Connect the power adaptor to the power input
on the rear of the receiver.
4.
Connect the A/V cable to the A/V OUT port on
the rear of the receiver (the plug looks like a
miniature headphone jack).
Connecting to a VCR / DVD Recorder
5.
Connect the yellow VIDEO OUT plug to the VIDEO IN port (usually
also yellow) on your VCR/DVD recorder.
6.
If you want to monitor/record audio, then plug the white AUDIO
OUT plug into the AUDIO IN port (also typically white) on the
VCR/DVD recorder.
7.
Connect the Video/Audio OUT of the VCR/DVD recorder to a TV
as detailed below.
8.
Attach the yellow VIDEO OUT plug to one of the INPUTS on the rear of the DVR. If your DVR uses
BNC connectors, you'll need to use a BNC/RCA adaptor (as pictured in the diagram). Most DVRs
use BNC plugs.
9.
If DVR supports audio, then you can plug the white AUDIO OUT plug to an AUDIO INPUT on the
rear of the DVR. These typically use RCA plugs and won't need an adaptor - but exceptions to
this rule exist.
10.
Connect the AUDIO and VIDEO OUTPUTS to your TV. Consult your DVR's manual for more
information regarding connecting a monitor to your DVR.
11.
Connect the yellow VIDEO OUT plug to a VIDEO IN port (usually yellow as well) on the TV you
want to use. Avoid component inputs (which are color coded red, green and blue) as these use a
very different type of video signal.
12.
If you want to monitor audio, the connect the white AUDIO OUT plug to an AUDIO INPUT on
the TV.
6 6 6
2
Connecting to a DVR
Connecting directly to a TV
4
6
5
8
VCR or
DVD
Input
Input
recorder
Output
Output
7
12
Television
11
INPUT 1
3
9
DVR
10
INPUT 3 OUTPUT

Advertisement

loading