About I.link - Sony HVR-A1E Operating Manual

Digital hd video camera recorder
Hide thumbs Also See for HVR-A1E:
Table of Contents

Advertisement

About battery life
• The battery life is limited. Battery capacity
drops little by little as you use it more and
more, and as time passes. When the available
battery time is shortened considerably, a
probable cause is that the battery pack has
reached the end of its life. Please buy a new
battery pack.
• The battery life varies depending on how it
is stored and the operating conditions and
environment for each battery pack.

About i.LINK

The HDV/DV Interface (i.LINK) jack on
this unit is an i.LINK-compliant Interface.
This section describes the i.LINK standard
and its features.
What is i.LINK?
i.LINK is a digital serial interface for
transferring digital video, digital audio,
and other data to other i.LINK-compatible
devices. You can also control other devices
using the i.LINK.
i.LINK-compatible devices can be
connected using an i.LINK cable
(optional). Possible applications are
operations and data transactions with
various digital AV devices.
When two or more i.LINK-compatible
devices are connected to this unit in a daisy
chain, operations and data transactions are
possible with not only the device that this
unit is connected to but also with other
devices via the directly connected device.
Note, however, that the method of
operation sometimes varies according to
the characteristics and specifications of the
device to be connected. Also, operations
and data transactions may not be possible
on some connected devices.
• Normally, only one device can be connected to
this unit with the i.LINK cable (optional). When
connecting this unit to an HDV/DV-compatible
device having two or more DVCAM (DV)
Interfaces, refer to the operating instructions of
the device to be connected.
• i.LINK is a more familiar term for the IEEE
1394 data transport bus proposed by Sony, and
is a trademark approved by many corporations.
• IEEE 1394 is an international standard
standardized by the Institute of Electrical and
Electronics Engineers.
About the i.LINK Baud rate
i.LINK's maximum baud rate varies
according to the device. There are three
types.
S100 (approx. 100Mbps
S200 (approx. 200Mbps)
S400 (approx. 400Mbps)
)
*
109
Continued 

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hvr-a1p

Table of Contents