To Initialize The Settings; Other Part Names And Functions - Sony HVR-A1E Operating Manual

To adjust the movie volume .........
Move the EXPOSURE/VOL lever  up
or down to adjust the volume. Move the
lever up to increase the volume and move it
down to decrease the volume.
• You can also adjust the volume by touching
(STANDARD SET)[VOLUME] (p.58).
Recording/playback
To check the remaining battery
(Battery Info) .......................... 
Set the POWER switch up to OFF (CHG),
then press DISPLAY/BATT INFO . The
approximate recordable time in the selected
format and battery information appear for
about 7 seconds. By pressing DISPLAY/
BATT INFO, you can view the battery
information for up to 20 seconds while it is
displayed.
Remaining battery (approx.)
Recording capacity (approx.)
You can assign functions to the
ASSIGN button.........................
Use [ASSIGN BTN] (p. 65) to assign
functions.
To turn off the operation confirmation
beep .................................... 
See [BEEP] (p. 65) to set the operation
beep.
To initialize the settings ............. 
Press RESET  to initialize all the
settings, including the setting of the date
and time.
(Menu items customized on Personal Menu
are not initialized.)

Other part names and functions

Internal stereo microphone

When an external microphone is
connected, the audio input from the
external microphone takes precedence
over others.
REC lamp

The REC lamp lights up in red during
recording (p. 65).
Remote sensor

Point the Remote Commander (p. 32)
towards the remote sensor to operate
your camcorder.
Speaker

Sounds come out from the speaker.
For how to adjust the volume, see page 23.
•
27