Cd Operation; With: Cd Navigation; System - Ford CG3548en Owner's Manual

Audio operation - Vehicles With: CD Navigation System
The BALANCE control is used to adjust
the sound distribution between the left and
right speakers.
The FADE control is used to adjust the
sound distribution from front to rear.
The TREBLE and BASS controls adjust
the high and low audio frequencies
respectively. These settings may be
customized for each source.
The LOUDNESS control boosts the lower
frequency range at low volumes to achieve
a fuller sound.
The COMPRESSION feature can be
turned on or off. With the feature on,
quieter music is boosted and louder music
lowered to minimise repeated volume
adjustments.

CD OPERATION

Note: For sound setting information See
Radio operation (page 17).
Press the CD/AUX button.
If a CD is loaded this will start playing,
otherwise a warning will appear advising
that the CD slot is empty.
Note: Pressing the CD/AUX button
repeatedly will toggle between the AUX
input mode, CD mode and CD changer mode
(if fitted).
Playing a CD
Loading a disc into the CD aperture will
automatically start CD playback and enter
the CD screen. If another source is playing
and a CD is already loaded, pressing the
CD/AUX button will resume CD playback.
Track seek
To advance a track press the SEEK up
button.
To go to the beginning of a track press the
SEEK down button. Press the button
again to go to the previous track.
Track fast forward/reverse
Press and hold the SEEK up and SEEK
down buttons to search forwards or
backwards within the track playing.
Shuffle
This feature will play tracks in a random
order.
Press the SHUFFLE button to turn this on
and off. The button stays highlighted when
this feature is on.
Note: The feature is applied either to the
whole CD disc or a folder in the case of a CD
disc with MP3 audio. Repeated button
presses toggle between these different
modes.
Repeat
This feature will play tracks on a
continuous loop.
Press the REPEAT button to turn this on
and off. The button stays highlighted when
this feature is on.
Note: The feature is applied either to the
track or a folder in the case of a CD disc with
MP3 audio. Repeat button presses toggle
between these different modes.
Scan
This feature will play a short introduction
of each track before advancing to the next
track. Turn the feature off once the desired
track is reached.
Press the SCAN button to turn this on and
off. The button stays highlighted when this
feature is on.
18