Rear Panel; Antenna Socket; External Speaker Jack - Vertex Standard VX-2200 Series Operating Manual

Rear Panel

13.6V DC Cable Pigtail with Connector
The supplied DC power cable must be connected to this 2-pin connector. Use
only the supplied fused cable, extended if necessary, for power connection.

Antenna Socket

The 50-Ohm coaxial feedline to the antenna must be connected here, using a
type-M (PL-259) plug.
D-Sub 15-Pin Accessory Connector
External TX audio line input, PTT (Push To Talk), Squelch, and external RX
audio line output signals may be obtained from this connector for use with ac-
cessories such as data transmission/reception modems, and external Group con-
trol input etc.

External Speaker Jack

An external loudspeaker may be connected to this 2-contact, 3.5-mm mini-phone
jack.
Caution: Do not connect either wire of this line to ground, and be certain that
the speaker has adequate capability to handle the audio output (12 W) from the
radio.
4
C
ONTROLS
VX-2200 ( LTR ) S
& C
ONNECTORS
ERIES
O M
PERATING ANUAL