Ai Tweaker Menu - Asus P5Q3 Deluxe/WiFi-AP@n User Manual

3.4

Ai Tweaker menu

The Ai Tweaker menu items allow you to configure overclocking-related items.
Take caution when changing the settings of the Ai Tweaker menu items.
Incorrect field values can cause the system to malfunction.
The default values of the following items vary depending on the CPU and
memory modules you install on the motherboard.
Main Ai Tweaker
Configure System Performance Settings
Ai Overclock Tuner
CPU Ratio Setting
FSB Strap to North Bridge
DRAM Frequency
DRAM CLK Skew on Channel A1
DRAM CLK Skew on Channel A2
DRAM CLK Skew on Channel B1
DRAM CLK Skew on Channel B1
DRAM Timing Control
1st Information : 6-6-6-15-4-36-6-4
2nd Information : 8-4-8-4-9-4-7
3rd Information : 15-6-1-7-7
DRAM Static Read Control
DRAM Dynamic Write Control
DRAM Read Training
DRAM Write Training
MEM. OC Charger
Ai Clock Twister
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
Scroll down to display the following items:
Main Ai Tweaker
Ai Transaction Booster
C/P : A1 A2
LVL : 09 09
********Please key in numbers directly!********
CPU Voltage
CPU GTL Voltage Reference(0/2) [Auto]
CPU GTL Voltage Reference(1/3) [Auto]
CPU PLL Voltage
FSB Termination Voltage
DRAM Voltage
NB Voltage
NB GTL Reference
SB Voltage
PCIE SATA Voltage
**********************************************
Load-Line Calibration
CPU Spread Spectrum
PCIE Spread Spectrum
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
ASUS P5Q3 Deluxe WiFi-AP@n
BIOS SETUP UTILITY
Advanced Power
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
BIOS SETUP UTILITY
Advanced Power
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
Boot Tools Exit
Manual
Auto
Select Screen
Select Item
Enter Go to Sub Screen
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Boot Tools Exit
It will affect DRAM
performance directly.
[Light]
Enhance DRAM
compatibility.
[Strong]
Enhance DRAM
performance.
Select Screen
Select Item
Enter Go to Sub Screen
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Options
3-15