Table of Contents
Advertisement
Super Speed
To start Super Speed configuration:
Click Super Speed from the main screen.
1.
2.
Check if the SATA cables
and power cords are installed
properly. Click Next to
continue.
Click Next to continue the
3.
configuration.
4.
Before proceeding, ensure to
back up all original data in the
two hard disks. Otherwise,
the system erases all data in
both hard disks. Click Next to
continue.
5.
The setup is completed. Click
OK to close the configuration
window.
4-48
Chapter 4: Software support
Advertisement
Table of Contents
