Sony Power HADFX HDC-P1 Operation Manual page 26

Page title Item
Page No.
<DATE> DATE/TIME
M13
<BATTERY BEFORE END
ALARM>
END
M14
BATTERY ALARM
<TCP/IP IP ADDRESS
SETTING>
SUBNET MASK
M15
DEFAULT
GATEWAY
SET
<LAN AUTO
SETTINGS> NEGOTIATION
M16
CONNECTION
SPEED
DUPLEX MODE
AUTO MDI/MDIX
MDI/MDIX
SET
<CNS CNS MODE
SETTINGS> Select the
M17 connection
system of the
network
CCU NO
MASTER IP
ADDRESS
SET
<NETWORK NETWORK ALL
RESET> RESET
M18
26
Menus
Settings
yyyy/mm/dd
hh:mm
11.5 V to 17.0 V
11.0 V to 11.5 V
ON, OFF
(The front tally lamp
goes out while the
battery alarm function is
operating. When
BATTERY ALARM is
ON, setting this item to
OFF disables the battery
function.)
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
Execute by ENTER.
When "SET OK?"
appears, execute by
ENTER again to confirm
the changes in the page
ON, OFF
10M, 100M
HALF, FULL
ON, OFF
MDI, MDIX
Execute by ENTER.
When "SET OK?"
appears, execute by
ENTER again to confirm
the changes in the page
LEGACY, BRIDGE, MCS
See "CNS SETTINGS
(MAINTENANCE menu)"
(page 14)
The default setting is 0.
When MCS is selected
for CNS MODE: 1 to
96
0.0.0.0 to 255.255.255.255
Execute by ENTER.
When "SET OK?"
appears, execute by
ENTER again to confirm
the changes in the page
Execute by ENTER.
When "RESET OK?"
appears, execute
ENTER again to restore
all settings of the
MAINTENANCE menu
items M15 to M17 to
their default state.
Page title Item
Page No.
<COLOR BARS
BARS>
HD BARS
M19
SD BARS
<OTHERS 1> FAN MODE
M20
V DTL CREATION
DTL H/V MODE
TEST2 MODE
WHITE SETUP
MODE
ALAC
<OTHERS 2> DATE TYPE
M21
FILTER WHT MEM
F NO. DISP
Settings
ON, OFF
BAR 16:9 (100%), BAR
16:9 (75%), MF-ARIB
(75%), MF-ARIB (100%),
MF-ARIB (+I), MF-SMPTE
(-I, Q)
DISABLE, SMPTE, EIA
(EBU), FULL, 95%, NTSC
100% (PAL 100%), Y/C-
RAMP, Y-RAMP
OFF, AUTO1, AUTO2,
MIN, MAX
AUTO1: Normal rotation
AUTO2: Slow rotation
(The internal temperature
may raise with the OFF
setting.)
NAM, G, R+G, Y
H/V, V only
3STEP, 10STEP
AWB, A.LVL
AUTO, OFF
With AUTO selected, the
status is displayed at the
right.
(ACTIVE):
Compensation in
progress
(WAIT): Waiting for
completion of lens
initialization
(STOP): Compensation
is turned off for a non-
applicable lens
1 Y/Mn/D, 2 Mn/D, 3 D/M/Y
4 D/M, 5 M/D/Y, 6 M/D
Y: Year
Mn: Month (numeric)
M: Month (character
string)
D: Day
ON, OFF
Set to ON to use
independent white
memory at each CC
filter position.
CONTROL, RETURN
Select the iris indication
on the panel when
AUTO IRIS is off:
CONTROL: To display
the value from the
camera
RETURN: To display the
value returned from
the lens
(When AUTO IRIS is on,
the value returned from the
lens is always displayed.)