Sony Power HADFX HDC-P1 Operation Manual page 25

Page title Item
Page No.
<OHB MATRIX> PHASE
M04 Select an axis
(angle) for which
the OHB matrix
adjustment to be
made.
HUE
Independently set
for 16 axes.
SAT
Independently set
for 16 axes.
ALL CLEAR
OHB MATRIX
MATRIX
<AUTO IRIS> AUTO IRIS
M05
WINDOW
OVERRIDE
IRIS LEVEL
APL RATIO
IRIS GAIN
IRIS CLOSE
Settings
0, 23, 45, 68, 90, 113, 135,
158, 180, 203, 225, 248,
270, 293, 315, 338
–99 to 99 0
–99 to 99 0
Execute by ENTER.
The HUE and SAT
values for all PHASE
settings are cleared.
ON, OFF
ON, OFF
ON, OFF
1, 2, 3, 4, 5, 6
Select the auto iris
windows:
1 2 3
4 5 6
The shaded parts
indicate the area where
light detection occurs.
–99 to 99, - -
Set the override to
temporarily change the
reference value for
brightness of the
automatic iris level in the
range of ±2 steps.
–99: Two steps to fully
closed iris
+99F Two steps to fully
open iris
- - : OFF
The setting returns to
" - - " when the power is
turned off.
–99 to 99 0
±4 steps
–99 to 99 65
–99 to 99 0
ON, OFF
Page title Item
Page No.
<TALLY> FRONT TALLY
M06 (U11)
REAR TALLY
BATTERY ALARM
<OUTPUT CURRENT
FORMAT>
M07 (U08)
[1080]
[720]
<DOWN SD ASPECT
CONVERTER>
CENTER LOCK
M08 (U10)
CROP POSITION
H INTERPOLATION A, B, C, D, E
V INTERPOLATION A, B, C, D, E
<VBS OUT> GAIN
M09
CHROMA
CHROMA LEVEL
SETUP
<SDI OUT> OUTPUT
M10 (U09)
<IMAGE H MIRROR
INVERTER>
V MIRROR
M11
DELAY MODE
<GENLOCK> GENLOCK
M12
STATUS
FORMAT
PHASE
V
H
Settings
OFF, LOW, HIGH
(Even if this is set to ON,
the front tally lamp goes
out while the battery
alarm function is
operating.)
OFF, ON
(The battery alarm
function is disabled
when this is set to OFF.)
OFF, ON
(The front tally lamp
goes out while the
battery alarm function is
operating. When
BATTERY ALARM is
ON, setting this item to
OFF disables the battery
function.)
Displays the current
format.
59.94i, 50i
59.94P, 50P
(When OUTPUT
FORMAT is changed,
turn off the camera
power. Operation will be
performed in the
selected mode the next
time the power is turned
on.)
EC, SQ
ON, OFF
(Fixed to ON when SD
ASPECT is SQ.)
–99 to 99 0
(Fixed to 0 when SD
ASPECT is SQ.)
–127 to 127 0
ON, OFF
–127 to 127 0
ON, OFF
Displayed when the
format is 59.94
HD-SDI, SD-SDI
ON, OFF
ON, OFF
ON, OFF
DISABLE, ENABLE
Display only
–1024 to 1023 0
–1683 to 1683 0
25
Menus