Table of Contents
Advertisement
Telephone settings
Caller ID announce
You can set your handset and/or telephone base to
announce the caller ID information for incoming calls.
The caller ID announce setting is independent for each
handset and the telephone base.
To change the setting:
MENU
1.
Press
2.
Press
or
press SELECT.
3.
Press
or
press SELECT.
4.
Press
or
press SELECT.
5.
Press
or
save. You hear a confirmation tone.
•
To use the caller ID announce feature, you must subscribe to caller ID
service from your telephone service provider.
•
Only the first four registered handsets will be able to use this feature.
•
If the phone number of the incoming call matches the last 7 digits of a
directory entry, the name will be announced as it appears in the entry.
•
The phone number will be announced when the name is unknown, private
or not provided. Only the last 11 numbers of a phone number is announced.
•
No information will be announced if both the name and number are private,
unknown or not provided.
•
This feature is not supported with headsets.
•
This feature does not announce information for call waiting calls.
•
If both home and cell lines are ringing, only the caller ID information of the
first ringing line will be announced.
•
It takes at least 2 rings for the phone to receive caller ID information and
announce it. If the phone is answered before the end of the second ring, it
will not have time to announce the caller ID information.
•
Pronunciation of names may vary with this feature. Not all names may be
pronounced correctly.
on the handset when it is not in use.
to highlight Settings, then
to highlight Annc Caller ID, then
to highlight Handset or Base, then
to choose On or Off, then press
SET
46
SETTINGS
Rename handset
Key tone
Dial tone
Annc Cal ler ID
BACK
SELECT
ANNC CALLER ID
On
Off
to
BACK
SET
Advertisement
Table of Contents
