Sleep Mode - Velux KLR 100 User Manual

Sleep mode

The life of the batteries can be prolonged by setting the
remote control to go into sleep mode. When it has been
set to go into sleep mode, the light in the display will be
turned off 20 seconds after the latest key pressure. Time
is shown.
Press any key to activate the remote control again. How-
ever, the stop key
The example shows how to set the remote control to go
into sleep mode.
1
Press "Menu".
2
Scroll through the menus:
user settings
3
Press to highlight "Sleep mode".
Press "Enter" to confirm your choice.
4
Press to highlight "On".
Press "Enter" to confirm your choice.
5
When the remote control is in sleep mode, time is shown.
Note: Choose "Off" in item 4 if you do not want the
remote control to go into sleep mode.
can be used at any time.
display
ENGLISH
House
no. 1
Window
Menu Locate
disPlay
display light
sleep mode
Enter Back
P1 P2
slEEP modE
on
off
Enter Back
P1
P2
03:43 am
VELUX 45